Viper 791xv issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78223
Printed Date: April 28, 2024 at 11:06 PM

Topic: Viper 791xv issues

Posted By: uniball
Subject: Viper 791xv issues
Date Posted: May 23, 2006 at 11:28 PM

OK I have a Viper 791xv on my 03 Dodge Ram and have a few problems. My alarm is set and my only LCD remote is broken beyond repair. I have a new LCD remote ready to be programmed. I removed the brains so the alarm won't go off. How do I go in valet mode to shut off the alarm? How do I program the new remote? Thanks,

uniball

Replies:

Posted By: godblessdremil
Date Posted: May 24, 2006 at 8:44 AM

Any shop should do that for free as its part of the warrenty. As for the Valet mode just turn your key to the on position and then just push the vallet switch. If i remember the number of times right here it is. Put the key to the on position, press the push button switch 9 times then push and hold, now hit the lock button on your remote, then let go of the push button.

Posted By: Velocity Motors
Date Posted: May 24, 2006 at 9:04 AM

Turn ignition ON and then OFF & then press the VALET button within 10 seconds. The LED Will stay on solid if in VALET mode.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: uniball
Date Posted: May 24, 2006 at 9:34 AM

Thanks guys I will give it a try.

uniball

Posted By: duct tape
Date Posted: May 24, 2006 at 10:12 AM

Velocity Motors wrote:

Turn ignition ON and then OFF & then press the VALET button within 10 seconds. The LED Will stay on solid if in VALET mode.

gotta make sure that a door is left open when you do this, or it wont work.

Print Page | Close Window