Hornet 563T Keyless Entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78359
Printed Date: July 04, 2025 at 7:00 AM

Topic: Hornet 563T Keyless Entry

Posted By: pmorton
Subject: Hornet 563T Keyless Entry
Date Posted: May 27, 2006 at 2:09 PM

Hello All,

Thank you 12volt for a great site.

I had a Hornet 563T installed in my 2000 Astro Van, which does not have power door locks. I see that the alarm can also access power locks, my question is what do I need to install the door locks? And I did not get the install manual with it, so what wires do I hook the locks up to.

Thanks for all your time and help with this

Paul Morton

Replies:

Posted By: pmorton
Date Posted: May 27, 2006 at 2:24 PM

P.S. I seen this on Ebay 2-PACK of HEAVY DUTY DOOR LOCK ACTUATORS LIKE 524N. Will this work to lock and unlock the doors, and should I put a 12v relay to activate the actuators? or will the 563T handle this?

Again thanks for your help.

Paul

Posted By: Twelvoltz
Date Posted: May 27, 2006 at 6:04 PM

Your 563T will need 2 relays to move aftermarket actuators. You would follow the diagram here for wiring the relays. The manual for the 563T can be found here. You will only need to pay attention to the negative door lock outputs from the 563T to trigger the relays.

You did not list the actual item number with your Ebay reference, however I am sure that they would work fine. Just keep in mind that they can be a pain to put in, so I would recommend a quality product to avoid having to take the doors apart in the future.

Hope this helps.
Good Luck!

Posted By: pmorton
Date Posted: May 28, 2006 at 2:09 PM

Thank you Twelvoltz for your reply. Here is a link to the item on ebay, I klnow this is a long link, but if you have the time let me know if this is what I need.

Again thank you for you kind help with this and have a great holiday..

https://item.express.ebay.com/Consumer-Electronics_Car-Electronics_Car-Alarms-Security_2-PACK-of-HEAVY-DUTY-DOOR-LOCK-ACTUATORS-LIKE-524N_W0QQitemZ9711096044QQptdnZCarQ20AlarmsQ20Q26Q20SecurityQQddnZConsumerQ20ElectronicsQQadnZCarQ20ElectronicsQQcmdZExpressItem

Posted By: Twelvoltz
Date Posted: May 29, 2006 at 7:13 PM

Why not try finding the 524N instead of something listed as 'just like the 524N'? There are some on Ebay and are the same price.

The one that you are looking at looks identical and may even be from the same factory with the same specs, but if you can buy the brand name for the same price why not buy the brand name?

Posted By: pmorton
Date Posted: June 01, 2006 at 4:20 PM

I did get the 524N and the 451M relay kit. I started to install it today, I did the drive side and it works great. I had to pull the unit down to install the little white cable from the 451M and now the alarm will not work the status light is on all the time when the key ignition is off and ideas what would cause this???

Paul

P.S. I did look at all connections and it looks ok

Posted By: mobilecustoms
Date Posted: June 02, 2006 at 7:31 AM

your in valet mode. take it out of it

-------------

Posted By: pmorton
Date Posted: June 02, 2006 at 7:52 AM

Twelvoltz,

Your the best! that did it. Thanks for all your help.

Paul