wiring battery backup

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78423
Printed Date: May 14, 2025 at 1:09 AM

Topic: wiring battery backup

Posted By: mrnathanman
Subject: wiring battery backup
Date Posted: May 29, 2006 at 10:01 AM

i recently bought an alarm which i installed myself. the alarm is activated by door triggers and a shock sensor. with the alarm i got an optional battery backup siren but it did not have a wiring diagram. from the unit there are 4 wires (red, black,white and blue) but i am unsure where they're sposed to go to. im guessing that black is an earth and red is power although i dunno whether its constant or accessories, does anyone have any ideas which wires go where?

thanx

Replies:

Posted By: Twelvoltz
Date Posted: May 29, 2006 at 7:02 PM

If you post the make and model of the alarm someone may be able to offer some assistance.

Posted By: mrnathanman
Date Posted: May 30, 2006 at 10:14 PM

ok i got it off ebay so its a cheap one from china. it just says its a TEC3 car alarm system. manufactured by techie on the move. there's no model number. the rest is in chinese.

Print Page | Close Window