79 impala, Starter kill
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78498
Printed Date: July 13, 2025 at 11:15 PM
Topic: 79 impala, Starter kill
Posted By: seve9ineimpala
Subject: 79 impala, Starter kill
Date Posted: May 30, 2006 at 10:20 PM
Hi, i have a 79 impala and am in the process of installing a compustar 1WAM4R alarm. The problem is i don't know which colour wires on the harness i need to connect the Ignition input (+) and the starter kill (-). Any help would be greatly appreciated and thanks in advance
Replies:
Posted By: OhioMike1101
Date Posted: May 31, 2006 at 8:00 AM
The yellow with black stripe goes to the IGN side
-------------
South Side Audio
2501 S. High St
Columbus, OH 43207
Posted By: Velocity Motors
Date Posted: May 31, 2006 at 8:23 AM
The ignition input on the alarm requires a switched ignition source from the vehicle so that the system knows that the vehicle is running so you won't be able to arm the system when there's a key in the ignition. The starter disable (-) will be the wire off the CN2 harness ( VIOLET I believe ) but test or confirm on your wiring diagram that this is the correct one, I don't have a diagram for this unit seeing that we do not bring in these systems.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|