Print Page | Close Window

galaxy 5000RS alarm lcd remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78609
Printed Date: July 19, 2025 at 2:20 PM


Topic: galaxy 5000RS alarm lcd remote

Posted By: tnez2
Subject: galaxy 5000RS alarm lcd remote
Date Posted: June 02, 2006 at 9:10 AM

Hi out there. I was wondering if there is any replacement lcd remote that will work on my galaxy 5000RS alarm, that will not go to sleep so i wont have to push a button to see the status of the alarm.



Replies:

Posted By: bdl666
Date Posted: June 02, 2006 at 9:16 PM

They all go to sleep to save the battery. As far as I know all brands do the same.





Posted By: tnez2
Date Posted: June 02, 2006 at 10:16 PM
well what i wanted is for the lcd remote to show armed , when the alarm goes to passive arm it does not show on my lcd remote i have to push a button in order to see if it armed.   like my wifes python alarm. my galaxy alarm only shows the time it does not have the little lock symbol or the antenna symbol. my bad as to install a galaxy alarm i have had a few problems with it.




Posted By: Powermyster
Date Posted: June 03, 2006 at 7:32 PM
didn't get that last bit....

all pagers you will have to confirm status with.

-------------
Why oh Why didn't i take the blue pill
Darren Power




Posted By: mobilesndfx
Date Posted: June 03, 2006 at 8:15 PM
If you have a Galaxy alarm that actually works, be happy! Myself and 3 guys I know in town have all owned Galaxy alarms, they either didnt work properly or decided to freak out a few months after being installed!! Good luck, hopefully yours will work properly.




Posted By: dspoppa
Date Posted: June 03, 2006 at 10:57 PM
I've had  my Galaxy 500rs for about two years now with no problems, and my remotes all say armed, or disarmed all the time, I don't have to confirm status.





Print Page | Close Window