Alarm, Door locks in an ’04 wrangler?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78629
Printed Date: July 19, 2025 at 2:21 AM

Topic: Alarm, Door locks in an ’04 wrangler?

Posted By: spawnbrad
Subject: Alarm, Door locks in an ’04 wrangler?
Date Posted: June 02, 2006 at 5:16 PM

I have an '04 wrangler sahara with a Mopar EVS base already installed. For the sake of convenience I'd like to install power locks. First off I guess I am wondering if the EVS base is even compatible with any power lock system. I don't want to have to use 2 remote transponders, preferably I'd like the entire thing to run off the security ones I have already. The system I have looked at as having some potential is the Commando universal power door lock kit. They have next to nil for information on it other than a claimed "hooks up to any car alarm or security system". If anyone has any experience with this already or a recommendation (aside from ripping out the EVS and starting over) I'd appreciate the help. Thanks!!

Replies:

Posted By: swamprat323
Date Posted: June 02, 2006 at 7:18 PM

yes the evs can controal power locks. i for get waht colors fork the alarm you need to use, i see if i can get a manural for it, i used to work for jeep.

Posted By: spawnbrad
Date Posted: June 03, 2006 at 1:16 PM

That would be awesome man! One other thing while I am at it. The EVS base has only an audible alarm indicator that I can't stand. According to the manual its possible to get a headlight illumination accessory but I cant seem to find this part anywhere. Happen to know if its even still being made by Mopar or where I could find one?

Posted By: spawnbrad
Date Posted: June 03, 2006 at 1:16 PM

Posted By: swamprat323
Date Posted: June 03, 2006 at 6:30 PM

its made by code alarm. im not sure on the head light part, its been a while. the model is the EVS 2, thsi was 4-5 years ago when i work tere. there are tryign to find the manural.

Posted By: spawnbrad
Date Posted: June 07, 2006 at 9:50 AM

Sorry I'm such a noob at this, I promise I am doing my best to learn. Once again the idea is to have the power locks run off the remotes I already have for the security system. Ideally to tie the locks directly into the security system. Here are photos of both the wiring diagram for the already installed Mopar EVS and the Commando power lock system.

posted_image

The only things connected to the harness for the EVS are the siren and the three switches including the pin switch, all other banks are free.

posted_image

The Commando system has leads for remote and alarm but they aren't terribly specific in the diagram. Have any guesses?

Posted By: spawnbrad
Date Posted: June 07, 2006 at 9:54 AM

exceeded maximum image size for the last post lets try this again...
Mopar EVS
posted_image

Commando Power Locks
posted_image