RSX Factory Alarm Arm/Disarm, Viper

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78906
Printed Date: July 14, 2025 at 6:54 PM

Topic: RSX Factory Alarm Arm/Disarm, Viper

Posted By: kanadian24
Subject: RSX Factory Alarm Arm/Disarm, Viper
Date Posted: June 08, 2006 at 9:32 PM

I searched and found a little information. Need clarification.
My Viper alarm does not have outputs for arming/disarming a factory alarm.

So, I was thinking of hooking up:
Viper (-) door lock to WHITE/ RED factory Rearm
Viper (-) door unlock to WHITE factory Disarm

Would it work? When the Viper system arms it locks the doors and arms the factory alarm. When the Viper system disarms it unlocks the door and disarms the factory alarm.

I want to retain the factory immobilizer and blinking dash light. Oh ya, diodes on all four wires (lock/unlock, arm/disarm)

Let me know. Thanks.

Replies:

Posted By: auex
Date Posted: June 08, 2006 at 11:08 PM

Sounds about right.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: kanadian24
Date Posted: June 09, 2006 at 12:55 AM

On a RSX forum, I was told that simply lock/unlock will arm/disarm the factory alarm without the need for additional connections... I am going try that first. If it doesn't work, then I will do as suggested.