Omega Pass 4 Bypass and Prestige APS786T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78916
Printed Date: May 13, 2024 at 10:12 PM

Topic: Omega Pass 4 Bypass and Prestige APS786T

Posted By: pcguy760
Subject: Omega Pass 4 Bypass and Prestige APS786T
Date Posted: June 09, 2006 at 4:29 AM

Hello,

I just received my APS786T alarm remote start unit and I got the Omega Pass 4 Universal transponder bypass for the remote start. I am kinda confused which wires go to where from Omega Pass 4 - it has one three wire plug (Red, Green and Blue with white stripe) - can someone please direct me?

Using this on a 97 Ford Expedition btw.

Replies:

Posted By: mo12v
Date Posted: June 09, 2006 at 8:23 AM

RED = 12 Volt Constant +
GREEN = Key Sense + or -
BLUE / White = Negative Output from Remote Start while Cranking & Running

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: pcguy760
Date Posted: June 09, 2006 at 2:27 PM

Hey thanks, but where does the KEY SENSE wire go to on 1997 Ford Expedition?

Posted By: mo12v
Date Posted: June 09, 2006 at 3:02 PM

Ign Key Warn

BLACK/ PINK (+)

IGNITION SWITCH HARNESS

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: pcguy760
Date Posted: June 10, 2006 at 4:07 AM

mo12v, thanks for the info and as always I notice you try to help me out :) I will let you know how it all turns out this weekend... last time I installed an alarm was like 3 years ago.

Thanks Bro

Posted By: mo12v
Date Posted: June 10, 2006 at 6:26 PM

Only thing on that Expedition that I don't like ....is the placement of the Ring.......
Have ran into issues of placement & lead wire.
Just be sure to put a little RTV on Ring once the R/S is working to keep it from moving.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: pcguy760
Date Posted: June 13, 2006 at 3:30 AM

Hey thanks I got it all working but only one problem I ran into, is that how do I get the running board lights to turn on? The alarm only turns on the interior lights - which I used a 12V relay to switch from Neg to Pos for the lights - maybe I need to locate the wiring for the outside running board lights and just tap into it huh?

Any idea what color or where it might be located inside? Thanks alot.

Oh and btw, I got a DEI 795 Paging system for it - did not arrive yet...