Window roll up

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78969
Printed Date: May 25, 2025 at 3:52 PM

Topic: Window roll up

Posted By: Johnnynguyen20
Subject: Window roll up
Date Posted: June 10, 2006 at 7:46 PM

hello, i'm going to install a window roll up modual. do i have to the the wire inside of the doors?

-------------
Johnnynguyen

Replies:

Posted By: ringojam
Date Posted: June 10, 2006 at 8:21 PM

Most imports you can wire at the kick panels.If its a clifford smart windows you have to wire at each door.Need more info on the install ? posted_image

-------------
Jamaica home of the worlds fastest man.

Posted By: Johnnynguyen20
Date Posted: June 10, 2006 at 8:31 PM

ringojam wrote:

Most imports you can wire at the kick panels.If its a clifford smart windows you have to wire at each door.Need more info on the install ?

\\\

i have a 93 mitshubishi 3000GT. but on the installation manual said, i have to get the wire from the switch to window motor wire. so that i must have to get the wire inside of the door right? for the passanger side i can get the wire from the kick panels right.?

-------------
Johnnynguyen

Posted By: cntrylvr79
Date Posted: June 10, 2006 at 11:09 PM

Yes the driver's window will have to get wired in the drivers door. The passenger window can be wired in the driver's kickpanel.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: killer sonata
Date Posted: June 11, 2006 at 12:08 AM

If you can control all of your windows from the drivers door you can wire all of the rollup mods from the drivers door

-------------
"People with mullets live 40% longer" - Ricky Bobby

Posted By: steel-reserve
Date Posted: June 14, 2006 at 12:28 PM

what i did was have constant +12v and find pulsed ground coming from my alarm wires (the ones not used) and used relays and spliced wires and used a timer relay (2) and made it so my option buttons were the buttons used to make the windows go up and down.. just splice the wire from the window and connect ground to 30 and power to 87a,and also power to 86 and 87 and the trigger from the timer (ground) to 85, then have the timer relay set to trigger from a ground pulse.. (well in my case i used ground but i guess u can use the reverse) connect the trigger to the pulsed ground which will in turn send a negative to ur 85 for a specified amount of time, but there are 2 wires left on the timer relay, well 3 actually.. the ground and power and another wire (orange), that is the wire that tells the timer what to send out, a positive or negative. anyway u tie that wire to the ground so the timer know to send ground to the brown wire (85) and wolla! done! now just set the timer to ur desire! trigger=black with white stripe,red=power,black=ground,brown=positive or negative(which ever the orange is connected to), and orange=what ur sending out (positive or negative) thats it.. hope this helps u in some sort of way! U should have someone verify this cause i dont have time to go back and edit.... peace! <ELCIPSE 2001,

Posted By: steel-reserve
Date Posted: June 14, 2006 at 12:36 PM

P.S. Timer used was a 528t DEI