compustar 2W900FM-AS Door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79078
Printed Date: May 04, 2024 at 9:13 PM

Topic: compustar 2W900FM-AS Door locks

Posted By: aceracer24
Subject: compustar 2W900FM-AS Door locks
Date Posted: June 13, 2006 at 2:57 PM

I recently installed some door locks posted_image

These do not have switches and are 5 wire. My question is would I follow this diagram posted_image

To hook up to my alarm? My locks appear to have only one relay that both doors harness converge into so...I'm a little clueless. The locks are designed so that when one is unlocked/locked the other follows suit. ANy help would be appreciated.

-------------
1968 VW Beetle
Pioneed DEH-780MP, 2 10' Memphis PR104D, Memphis PR500.1, TXC 6.1, MTX Thunder 8502

Replies:

Posted By: aceracer24
Date Posted: June 13, 2006 at 7:12 PM

Well I was really hoping for a reply by now, I have the alarm and currently installing it. The main harness is done now i need to run the rest of the wires including the door locks. I have no clue how to go about doing this though :( I only have the one relay that functions both locks together. I guess trial and error?

-------------
1968 VW Beetle
Pioneed DEH-780MP, 2 10' Memphis PR104D, Memphis PR500.1, TXC 6.1, MTX Thunder 8502

Posted By: aceracer24
Date Posted: June 14, 2006 at 12:06 AM

Well I figured it out myself with a test light.

-------------
1968 VW Beetle
Pioneed DEH-780MP, 2 10' Memphis PR104D, Memphis PR500.1, TXC 6.1, MTX Thunder 8502

Print Page | Close Window