trying to hook up a window control module,have hornet 564t alarm not sure where to hook up the activation wire any help would be great.
If it is windows up then you hook it to the orange ground when armed wire coming off of the alarm. You must diode isolate the wire from the starter kill relay.
If it is for windows down then you hook it to the WHITE/ blue channel 3 output wire coming off of the alarm. Program the alarm to validity.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
HI
Actually you do not need a diode at all. I just wired mine over the weekend and works great. What you do is get the wire coming from the alarm which is ground when armed and should be orange. You cut that wire in half. Take the wire from the alarm and wire it to the activation wire off the controller. If your controller has an accessory wire, on mine it is pink, you wire that to the other side orange wire leading to the starter kill relay. This is how I got mine to work and I got the diagram here by reading some of the posts other members have left. Let me know if it worked out for you. By the way is your controller for 2 or 4 windows? Just asking, mine is for a 2 door 80 Cadillac coupe. Talk to you later and good luck.
-------------
cadillac_coupe