Print Page | Close Window

Total closure for tilt and slide sunroof

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79244
Printed Date: May 29, 2024 at 12:34 AM


Topic: Total closure for tilt and slide sunroof

Posted By: sunnyboy368
Subject: Total closure for tilt and slide sunroof
Date Posted: June 17, 2006 at 1:30 PM

Hi guys,

I own a Nissan Sunny GTI, 1993. It has two front electric windows and a tilt and slide electric sunrroof.

I want some advice on how to install the total closure unit so that it will work on the sunroof. The sunroof tilt closure will not operate if it has been slid open or conversley the slide motor will not work if it has been tilted open.

I have installed a totla closure unit twice but only for a two and four door car with no sun roof. Adivce please?

Also does anyone know where i can get good strong trunk release solenoid. The ones that i purchased on ebay are not strong enough for my car..and pointers to where i can get them would be great.

god bless you all

Sunnyboy368



-------------
EZ
Sunnyboy368



Replies:

Posted By: KPierson
Date Posted: June 18, 2006 at 9:37 AM

I've heard of people using magnetic switches to control closure systems.  I've also personally used microprocessor based circuits to determine the exact location of the sunroof at any given time.  The tilt function definately adds a degree of complexity to the system.

Good luck.



-------------
Kevin Pierson


Print Page | Close Window