Print Page | Close Window

06 xb factory alarm issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79373
Printed Date: April 29, 2024 at 5:25 AM


Topic: 06 xb factory alarm issue

Posted By: audiophyle_247
Subject: 06 xb factory alarm issue
Date Posted: June 20, 2006 at 2:54 PM

I have a 06 xB special release 3.0

It came with a factory alarm, and it is causing a problem with my Viper 791.

Everything works perfect EXCEPT the remote start. When I arm the alarm, it does everything it is supposed to, and also arms the factory alarm.  Remote starting starts ythe car no problem, but the factory alarm gets triggered.  Being that the unlock & disarm wire are one in the same, how do I get the factory alarm disarmed without unlocking the doors?

If I disarm the alarm, rs it, and then rearm the alarm it works fine. But every time I forget to do that & just rs it, the damn horn starts honking. 

I am out of ideas, anyone else have this issue?



-------------
Unless it raises the hair on the back of your neck, its only noise!



Replies:

Posted By: Chris Luongo
Date Posted: June 20, 2006 at 4:05 PM
Use the Viper's status output to ground the Toyota's keysense wire during remote start.



Posted By: audiophyle_247
Date Posted: June 20, 2006 at 5:49 PM

Thats too easy. :P  Makes sense though.

THanks a bunch.



-------------
Unless it raises the hair on the back of your neck, its only noise!



Posted By: integratyper934
Date Posted: June 20, 2006 at 10:35 PM

as carlos mencia would say "der da der" or how u spell it


Print Page | Close Window