power windows

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79378
Printed Date: May 11, 2024 at 4:54 PM

Topic: power windows

Posted By: kmongru
Subject: power windows
Date Posted: June 20, 2006 at 5:42 PM

Hi i am looking to put in power windows into my 96 dodge neon. I have a dei 529T windows module. Does anyone have any information or help as to goin about with this install. Im not too sure how to install power windows.? thanks all input in appreciated.

Replies:

Posted By: h2oskierfl
Date Posted: June 20, 2006 at 5:50 PM

More info. Are you trying to put motors on your manual windows or are you trying to automate your electric windows?

Posted By: integratyper934
Date Posted: June 20, 2006 at 10:32 PM

i would take it to a professional....there alot involved unless u have adequate tools and knowledge u will end up spending more than taking it to a shop.

Posted By: kmongru
Date Posted: June 21, 2006 at 11:11 AM

i want to put motors on my manual windows, once i get enough information i will have no trouble doing it, i just need to be pointed into the right direction, any suggestions are appreciated

Posted By: forbidden
Date Posted: June 21, 2006 at 11:29 AM

The you need a power window kit and controls to start. Look to a Spal power window kit to start. Then you can interface the DEI window control module to the new power windows.

-------------
Top Secret, I can tell you but then my wife will kill me.

Print Page | Close Window