529T gray and gray/black wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79625
Printed Date: May 16, 2025 at 8:35 PM

Topic: 529T gray and gray/black wire

Posted By: Ishinc
Subject: 529T gray and gray/black wire
Date Posted: June 25, 2006 at 9:15 PM

I installed a few of these 529T window modules in my car. Does anyone know what this wire ( Gray/Black= (-) OUTPUT Through Activation, side 2 )is for?

what does it exactly do? It doesn't seem like I need to hook it up to anything for my windows to work. The manual said to combine the wire with the input activation wire.

Thanks!

Replies:

Posted By: ragingwookie
Date Posted: June 27, 2006 at 3:51 PM

i honestly am not possitive but my guess would be that would be the wire you would connect to some triggwer from another unit like if it needs to see ground or 12volts it will activate the relays just a thought

Print Page | Close Window