remote start/alarm, auxiliary 2 output?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79698
Printed Date: April 30, 2024 at 11:31 PM
Topic: remote start/alarm, auxiliary 2 output?
Posted By: mannygi
Subject: remote start/alarm, auxiliary 2 output?
Date Posted: June 27, 2006 at 7:30 PM
i am a rookie installing a security system with remote start. im not that far along yet but my first question is that i can't find the right wire to hook up my auxiliary 2 output (-) 500 mA wire that connects to a relay or module for an optional feature such as power window activation, etc. does anyone have any input on my problem.
Replies:
Posted By: mannygi
Date Posted: June 27, 2006 at 8:05 PM
well i might sound pretty dumb right now but this my first project on my vehicle.So before i actually hook my battery up can anyone give me the play by play on installing a remote start/alarm w/ keyless entry. i would truly appreciate it my vehicle is a 98 honda civic 2dr ex manual trans.
Posted By: Velocity Motors
Date Posted: June 27, 2006 at 10:22 PM
Your asking alot of anyone here to type out a play by play for this type of installation. The best would be to read through the forums and if you run into problems you can ask them here and someone will be able to help you. As far as your AUX output, you have to first have a device that you want to operate witht he AUX channel and then you need to program the AUX channel as a pulsed, latched or constant ( if the unit has this capability ).
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: captainzab
Date Posted: June 27, 2006 at 11:41 PM
What he said,
look through the forum and post a REAL question.
Read the basic on car security at the links to the left.
Once you run into problems, put them here.
Also, read the installation manual because it will tell you the wire and how to hook them up
Posted By: KarTuneMan
Date Posted: June 27, 2006 at 11:46 PM
Your first attempt....and it's a manual trans! What are you puttin in?
-------------
Posted By: mannygi
Date Posted: June 28, 2006 at 5:52 PM
im putting a galaxy 500 RS-2W alarm/ remote starter. It also has a 5-button 2- way LCD remote transmitter.Yeah i had no idea all the wiring involved. but i finished hooking all my wires last night according to my alarm manual and my vehicle diagram. MY alarm works perfect but i have a problem getting my parking lights to blink when i activate my alarm. I hooked up my White parking light output (+) (-) from my alarm harness to my RED / black wire located under my dash fuse box. this is what my diagram says is the parking lights wire. So if anyone knows how i might solve my problem i would appreciate it. Also my LCD remote transmitter is not displaying my vehicles status ie. DOOR OPEN, SYSTEM ARMED. etc. it locks my doors and activates my alarm perfectly.So if i can get some input on my transmitter it will help me out a ton.
Posted By: bnaplaya
Date Posted: July 05, 2006 at 2:10 AM
I had the same problem with my 2 way scktec alarm with the lcd sceen. But mine did the opposite, it showed evertyhing open. A friend of mine that owns a shop told me that they aren't a good brand to deal with. The shock sensors after a while will start send false signals when nothings going on. Right now i changed over to an Autopage 2 way that i found on www.carmedia1.com for 200 bucks and i love it. ------------- Larry_Myers
|