Print Page | Close Window

05 corolla?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79718
Printed Date: June 10, 2024 at 8:44 PM


Topic: 05 corolla?

Posted By: cml0101
Subject: 05 corolla?
Date Posted: June 28, 2006 at 11:27 AM

can someone tell me how to get my remote start working on a 05 corolla? im have a problem with the keysense.directed notes said to connect the status output up to the keysense wire and it would work but its not and some people are telling me that i need the 556u with an extra key and some are telling me i dont need the key

-------------
cml



Replies:

Posted By: captainzab
Date Posted: June 28, 2006 at 4:02 PM
Yea, u need a bypass
either 555U or 556U with key inside (or a keyless bypass by different company)
use status output and connect it to the keysense wire to disarm factory alarm without unlocking the door
Try to remote start with the key inside the first before you use the bypass to make sure remote start works at all




Posted By: Chris Luongo
Date Posted: June 29, 2006 at 7:34 AM
All Corollas 2005-up, even the stripped CE, have a transponder key. So, you DEFINITELY need some sort of bypass for that.

You can get the 556U (or any similar product from another brand) and put a spare key in it, or see if they have a no-key-required part at bypasskit.com.

As far as I know, they haven't made a Corolla with an alarm from the factory, so you shouldn't need keysense, unless you have one of the dealer-installed Toyota VIP alarm systems.

1. Open a window.
2. Close the hood, trunk, and doors, and lock the doors with the Toyota remote.
3. Wait at least 30 seconds, then reach inside the window, unlock the door, and open it.
4. If the horn doesn't beep, you don't have a factory alarm.




Posted By: captainzab
Date Posted: June 29, 2006 at 6:33 PM
Yea, Chris is right, most likely you dont have a factory secirty system so you dont need to worry about that keysense wire





Print Page | Close Window