1990 RHD Toyota Landcruiser door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79812
Printed Date: July 16, 2025 at 3:44 PM

Topic: 1990 RHD Toyota Landcruiser door locks

Posted By: jrhaze
Subject: 1990 RHD Toyota Landcruiser door locks
Date Posted: June 30, 2006 at 11:03 PM

I am installing an alarm in my 1990 Landcruiser HDJ81 RHD japanese import and have a couple questions, I'm pretty new at this.

If I don't have factory keyless entry and I do have factory power locks, will I need to use relays to get the door locks working? Or can I just hook up the appropriate wire from the alarm directly to the appropriate door lock wire?

Second, I have the door pin wire installed, but when I arm the alarm then disarm it I get a door open icon flashing on the remote. Even when the door isn't open. Other than that it seems to work, and if a door is opened while it is armed the alarm is triggered as it should be. The door trigger shows 12v when the door is shut and 0 when the door is opened and I hooked it up to the negative door trigger wire from the alarm. Should it be hooked up to the positive trigger? The alarm/starter is an Ungo SR6000 BTW.

Lastly if anyone has any tips as to how I can find the wire for my wait to start light without pulling the instrument cluster I'd very much appreciate it!!!

Thanks for any help!!!

Replies:

Posted By: dea,can
Date Posted: July 02, 2006 at 4:45 AM

-------------
dragon

Posted By: dea,can
Date Posted: July 02, 2006 at 5:02 AM

-------------
dragon

Posted By: ringojam
Date Posted: July 02, 2006 at 8:14 PM

Sorry but the land cruiser uses a - pulse door lock system just test at the kick panel for the lock un lock pulse.The problem for the doors is maybe you have a dome light delay? you need to wire behind the instument cluster at door indicator wire,2nd japanese toyotas have terrible pin switches ! you need to check each of them and replace as needed.

-------------
Jamaica home of the worlds fastest man.

Posted By: jrhaze
Date Posted: July 02, 2006 at 8:16 PM

thanks for the help, got the locks working. Not too much to them. As far as the door open indicator I think it was just the alarm being buggy, after a few lock/unlocks it seems to have somehow corrected itself?

Now I just need to get the remote start functioning . . .

Thanks again for the help.

Posted By: jrhaze
Date Posted: July 02, 2006 at 8:18 PM

dea,can wrote:

Is it possible to find one of these sheets for the Japanses version of the landcruiser? One that had a location for the glow plug wire would be excellent! The wire colors are different on mine than that shows too.

Any ideas?