scanner

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79839
Printed Date: May 15, 2025 at 8:34 AM

Topic: scanner

Posted By: stephen0715
Subject: scanner
Date Posted: July 01, 2006 at 10:05 PM

I install a scanner and connect it to the starter killer wire (yellow), when I arm the car, it works for only 30 seconds and then it goes off. Anyone has idea?

Replies:

Posted By: deezee
Date Posted: July 02, 2006 at 11:11 PM

instead you shoud tap the negetive of the scanner to the ground when armed wire if there is one and then just put the other wires of the scanner to 12v positive

Posted By: stephen0715
Date Posted: July 09, 2006 at 1:58 PM

what if i don't have the negative wire when armed,where do i connect the wire to?

Print Page | Close Window