2W900FM doesn’t work if close to car

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79949
Printed Date: April 28, 2024 at 5:00 AM

Topic: 2W900FM doesn’t work if close to car

Posted By: tomkang2000
Subject: 2W900FM doesn’t work if close to car
Date Posted: July 05, 2006 at 2:20 PM

Hi, all:

I have stange issue, if pager 2W900FM(blue) is close by the car, it doesn't work, walk away from car for 10 feet, it works again; how ever 1 way remote always works perfectly;

I also tried to re-program the page, however because this issue, I can not program my page inside my car; I have to turn on and off key 5 times and jump out the car immidiately far for 10 feet, then it programed; 1 way remote can be programed inside without any issue! any ideal? thanks!

Replies:

Posted By: jimmeezgolfvr6
Date Posted: July 05, 2006 at 2:29 PM

sounds like you've activated a feature called "auto" by accident, which is done by pressing and holding onto button 1 for over 2 seconds. when this feature is activated, the alarm will automatically disarm when the pager is close to the vehicle, and automatically arm when the pager is far from the vehicle.

you can deactivate this feature in the same way....press and hold button 1 for over 2 seconds. there should be an indication on your display that this feature is on. good luck!

-------------
all problems can be resolved with a hammer

Posted By: tomkang2000
Date Posted: July 05, 2006 at 5:04 PM

thanks a lot, that was execactly the issue!

Print Page | Close Window