hornet 554T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7998
Printed Date: May 15, 2025 at 2:49 PM

Topic: hornet 554T

Posted By: mobiletoys2002
Subject: hornet 554T
Date Posted: January 11, 2003 at 1:52 PM

i installed a hornet remote starter, alarm, pager on this 2003 chevy trailblazer and everytime the customer wants to remote start the car the hornet alarm sounds the siren the car remote starts and everything but this happens. it seems to happen after the car sits for a while, why does this keep happening???? i have installed a pldata bypass and a gmdl1 interface can someone explain why this keeps happening i am lost here .

Replies:

Posted By: Velocity Motors
Date Posted: January 11, 2003 at 5:41 PM

If the Hornet systems alarms while remote starting, then there must be a trigger on one of the points of entry or a wire gets ground or power when it's supposed to only be 0 at time of start. Make sure that you are checking the door trigger wires and they are not getting voltage when the RS starts.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: djfearny2
Date Posted: January 11, 2003 at 6:23 PM

hornet is dei do get the 455g from dei it takes care of your problem.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Print Page | Close Window