Print Page | Close Window

AstroStart 5204, 19 flash error

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80143
Printed Date: May 23, 2024 at 2:18 AM


Topic: AstroStart 5204, 19 flash error

Posted By: KarTuneMan
Subject: AstroStart 5204, 19 flash error
Date Posted: July 10, 2006 at 6:27 PM

I'm installing a 5204 in a 06 Scion XA. I'm getting a 19 flash error. I'm a bit confused, the book only has codes listed to 17 falshes???:errr: 

What the frik is a 19 error?     ANYONE?



-------------



Replies:

Posted By: KarTuneMan
Date Posted: July 10, 2006 at 6:30 PM
ALL fuses check on both sides of the fuse holders, acc, ign. and starter all have power. No imobilizer is needed. Locks work, lights work, door triggers work. I have checked all that I can think of....I look like a fool to my kid.posted_image

-------------



Posted By: Velocity Motors
Date Posted: July 10, 2006 at 11:45 PM
Have you tried a new CPU & remove all possible triggers ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: KarTuneMan
Date Posted: July 10, 2006 at 11:56 PM
Yes, traded out the 5204 brain for a 3106 (non 2 way) relearned tach. same error comes up. Deactivated the alarm function to make it a remote start only....same error. pickin the car up from my kid tomorrow and callin tech. 

-------------



Posted By: KarTuneMan
Date Posted: July 11, 2006 at 11:07 AM

F.Y.I.   19 flashes = unit is in manual transmission mode. Program for auto trans required.

Page 15 of the install manual.  JUST NOT MY MANUAL, I GOT ONE OF THE OLD ONES.



-------------



Posted By: autostart ak
Date Posted: July 11, 2006 at 2:13 PM
dipswitches 4,5,6,7 all in the up position to program it for an automatic transmission. All of the newer Astrostarts come preprogrammed as a manual RS.


-------------
AutoStart Alaska



Posted By: autostart ak
Date Posted: July 11, 2006 at 2:14 PM
oh yeah, for the others that might be reading this. All of those switches in the up position, hit the brake, then put all in the off position, then hit the brake again.


-------------
AutoStart Alaska


Print Page | Close Window