LED problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8022
Printed Date: July 05, 2025 at 11:24 PM

Topic: LED problem

Posted By: serdarat
Subject: LED problem
Date Posted: January 11, 2003 at 11:59 PM

I have a viper600 esp. nice alarm but i am tired of the boring red flashing led light. i want to wire some 5volt leds that i want to wire up to my alarm, but the alarm led wire is only 2 volts. is there something i can do to make this work?

Replies:

Posted By: ch52253
Date Posted: January 12, 2003 at 12:09 AM

You can buy a neon LED's that will hook up to the alarm without any modification. You can buy these at almost any stereo shop.

Posted By: serdarat
Date Posted: January 12, 2003 at 12:33 AM

this is the deal i kinda had an ideal and acted before i thought it out. i seen a car that had a flashing led with there factory alarm on the door lock. well i wanted one in my outer door handle. so i got a spare door handle ffrom the junk yard painted it drilled it fitted it made it look nice, got the led's but there was a probem with volts. now i can't find single led's with that low of volts. and if possible would prefer to use the one's i already have

Print Page | Close Window