Progressive unlocking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8032
Printed Date: August 01, 2025 at 10:17 AM

Topic: Progressive unlocking

Posted By: stangs2fast
Subject: Progressive unlocking
Date Posted: January 12, 2003 at 12:39 PM

Hoping to find some help on this one? I've installed a Viper 550 ESP in my 98 F-150 and thanks to "the12volt" I got all the wiring diagrams I needed to get the thing in and working right, which it does. But what I need help with is how would I wire up progressive door unlock. It has the factory keyless entry so the door lock and unlock pulses are negative. Would appreciate any help.

Replies:

Posted By: themagicone
Date Posted: January 12, 2003 at 2:30 PM

If the your unti has a 2nd channel output and you can change it to 2nd unlock you can do this.... Wire the main unlock wire to relay that goes to the power locks motor in the driver door and then use the 2nd channel output to energize a relay that send a negative to the unlock wire

Print Page | Close Window