Open Starter Kill on Compustar CM3000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80438
Printed Date: May 18, 2025 at 4:47 AM

Topic: Open Starter Kill on Compustar CM3000

Posted By: ymboc
Subject: Open Starter Kill on Compustar CM3000
Date Posted: July 18, 2006 at 1:08 PM

Can anyone give me a heads up on how to hook up a normally open starter interrupt?

I'm trying to find a "(-) when disarmed" on the compustar CM3000. I see the "(-) when armed" on pin#5 on connector#1.

Is the only way to get a "(-) when disarmed" to hookup another relay off of that "(-) when armed" output?

Thanks

Replies:

Posted By: dea,can
Date Posted: July 18, 2006 at 5:06 PM

this diagram is from blackwidow so follow the wires from your unit .

-------------
dragon

Posted By: ymboc
Date Posted: July 18, 2006 at 7:01 PM

Thanks dea,can

Q: does your black widow give a (-) out on the BLACK/ red when disarmed ?

Unless I'm missing something the only alarm status output I see on the compustar is the (-) out when *armed* (I need the opposite)

That being said I'm new to the game so please correct me where I'm wrong

Posted By: JWorm
Date Posted: July 18, 2006 at 8:01 PM

There is no wire on the Compustar that does what you want.

Posted By: dea,can
Date Posted: July 18, 2006 at 11:32 PM

u dont have a violet color wire thats (-) when armed out

-------------
dragon

Posted By: dea,can
Date Posted: July 18, 2006 at 11:33 PM

-------------
dragon

Posted By: JWorm
Date Posted: July 19, 2006 at 6:51 PM

dea,can wrote:

u dont have a violet color wire thats (-) when armed out

Do you know what a normally OPEN starter kill is?

If the alarm brain is unplugged, the starter kill stays active. The alarm must be disarmed before a (-) signal is sent to the relay activating it (connecting 30 and 87 together) which allows the car to start.

Old Alpine alarms had this option, and newer DEI systems like the Python 900 have this option. Compustar does not.

Posted By: ymboc
Date Posted: July 20, 2006 at 9:30 PM

Thanks for the replys...

as has been stated... the compustar cm3000 doesn't (appear) to have a "(-) when disarmed" output necessary to (easily) achieve a normally open stater kill. Instead it has a "(-) when armed" output.

Is there a workaround to achieve a normally open starter kill on a compustar?