Print Page | Close Window

clifford arrrow 3 door trigger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80603
Printed Date: May 15, 2024 at 3:54 PM


Topic: clifford arrrow 3 door trigger

Posted By: mrcllusb
Subject: clifford arrrow 3 door trigger
Date Posted: July 22, 2006 at 11:31 AM

I just installed my clifford arrow 3 into my 98 dodge intrepid.I hooked up the door trigger wire from the arrow 3 to my dome supervision wire,and if the system is armed and you open the doors,it will go off.But if i let it start to rearm on it's own,it will not sense that the door is open.Any help is greatly appreciated..

-------------
"ole blake"



Replies:

Posted By: glantern83
Date Posted: July 26, 2006 at 5:07 PM
I belive your problem is one in a feedback nature... Or maybe a time delay nature...
The best thing to do would be to use the door triger wire...

visit:
https://www.directwholesale.net/diagrams/diagram.asp?ModelID=14360&MakeID=16&link=BULLDOG

for info and a diagram for diode isolating... It's your best bet...

-KITT


Print Page | Close Window