240sa
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8075
Printed Date: May 17, 2024 at 5:58 PM
Topic: 240sa
Posted By: 240sx_owner
Subject: 240sa
Date Posted: January 13, 2003 at 12:02 PM
Installing a Sidewinder 6500esp on a 1992 240sx. I found the lock wire and I seen the diagram here. Do I need to use a diode with the relay? If so does anyone know what the value should be?
-------------
It's all fun and games still someone looses an eye
Replies:
Posted By: jrilla
Date Posted: January 13, 2003 at 12:33 PM
here is all you need to do: Cut the ORANGE / Black wire, the doors should lock, then put one half of the wire to Pin 30 and the other half to Pin 87a, Pin 85 goes to your (-)lock output from your alarm and your (-)Unlock wire goes directly to the ORANGE / Black wire on either side of the relay. If you want to. You do not need a diode.
-------------
J Rilla
Owner/Installer
|