Viper 791 remote programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80751
Printed Date: May 16, 2024 at 3:28 AM

Topic: Viper 791 remote programming

Posted By: arlbrl
Subject: Viper 791 remote programming
Date Posted: July 25, 2006 at 3:16 PM

The remote of a Viper 791 has become unprogramed to operate the system. When I go to reprogram the remote the system goes into the learning mode but will not allow programing to the remote. The remote is good as it programed to another Viper 791system. BUt won't program to the system it belongs. What are the chances the brain module is going out? Like I said the system enters the programing mode. Any information will be great.:errr:

-------------
T-Man

Replies:

Posted By: JWorm
Date Posted: July 25, 2006 at 8:27 PM

Probably a problem with the antenna. Unpljug the antenna cable from the antenna for 10 minutes, plug it back in, and try to program it again.

Print Page | Close Window