Print Page | Close Window

86 corolla, wiring aftermarket locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80889
Printed Date: April 27, 2024 at 10:12 AM


Topic: 86 corolla, wiring aftermarket locks

Posted By: rallysport
Subject: 86 corolla, wiring aftermarket locks
Date Posted: July 28, 2006 at 9:31 AM

im doing 4 door lock actuators in our 86 corolla. im using a python 871xp. heres the trick i cant figure out im using a 451m and the alarm has a 2nd unlock (-) output but im unsure of how this works, what i want to do is set it up so when you arm the alarm itll lock all 4 but disarm will unlock the drivers then a second press will unlock the rest however i would also like to add a switch to be able to lock and unlock without the alarm. i have a 3 prong switch that outputs a ground, can i tap into the blue and green wires going to the 451m without damaging the alarm?

-------------



Replies:

Posted By: captainzab
Date Posted: July 28, 2006 at 2:42 PM
You will have to have a seperate relay for the driver door and use the 451m for your other 3.
The blue and green wire of the 451m is the input and yes you can connect your wire and switch to it.
Wire This for driver side.




Print Page | Close Window