A/M alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80898
Printed Date: May 23, 2024 at 5:21 AM

Topic: A/M alarm

Posted By: abchase
Subject: A/M alarm
Date Posted: July 28, 2006 at 1:08 PM

Ok, one of the guy's I work with, just bought a used truck. The truck has a CM2400, already installed. We've determined that it's either a CompuStar CM2400, or a First Tech, or maby even a Vision. I belive all three are related. It was installed into a 2003 Dodge Ram 2500 HD. We've got the unit to go into learning mode, but I cant seem to get it to respond to the remote I have. (a CompuStar s/n:004801, FCC ID: 044JR1600)

If there is anyone that could help it would be greatly appreciated....

Replies:

Posted By: abchase
Date Posted: July 28, 2006 at 2:22 PM

Ok my mistake it's a CM4200.

Not a Cm2400... Sorry

Posted By: abchase
Date Posted: July 31, 2006 at 8:23 AM

BUMP!

Noone... posted_image

Posted By: Velocity Motors
Date Posted: July 31, 2006 at 8:56 AM

You must toggle the ignition switch 5 times within 3 seconds and press the lock button as well within this time frame. If you toggle the switch 5 times and you do not get 2 light flash response, then you did not toggle the switch fast enough.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: abchase
Date Posted: August 02, 2006 at 3:09 PM

Thank you for the responce. I've gotten' it into the programing mode. I just can't seem to program the reomte. But for an update, I did find out that.... The remote we got to replace the "missing ones" is AM, where as the remote we need is FM. I'll update when the new ones arrive.

Print Page | Close Window