installed viper 800esp, but lock system won't work
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8096
Printed Date: May 15, 2025 at 9:25 PM
Topic: installed viper 800esp, but lock system won't work
Posted By: myredbeauty
Subject: installed viper 800esp, but lock system won't work
Date Posted: January 13, 2003 at 7:16 PM
hi. i am a new here. i just found this site, then i hopefully will get some help here. i just installed viper 800esp in my '91 thunderbird sc, but the door lock system isn't working right now. the security system is working, and trunk hooks up, too, but the door lock system. i wired with type c in installation guide. then the door lock switch is working with it, so that means i installed it correctly, right? and i got '91 firebird, and she got clifford one, and that system got auto-armed system. does the viper 800esp have that system? because mine is not doing it. if anybody knows about it, please help me out. thank you very much.
Replies:
Posted By: Velocity Motors
Date Posted: January 13, 2003 at 7:44 PM
Did you choose the proper polarity for the Viper system to trigger the relays ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: myredbeauty
Date Posted: January 13, 2003 at 9:37 PM
my car doesn't have relay for door lock. so as i said i installed it with type c in installation guide. i cut the wires, and the lock wire from driver side goes to the module, then the wire from the module goes to passanger side lock. and the unlock wire goes to the module, then the wire from the module goes to the passanger unlock like that. well, now the remote door lock system isn't working, un.... it's okay, but i mostly need the remote lock system, you know. anyway, i think i'm doing good with it. if i'm not, please tell me. thank you. and i think it got Custom configure memory seats and mirrors. anybody knows how can i do with it? thank you.
Posted By: AlarmTech
Date Posted: January 15, 2003 at 12:23 PM
from the 800ESP the doorlock wires should be: WHITE/ black = LOCK switch side GREEN/ Black = LOCK motor side BROWN / Black = UNLOCK switch side Blue/Black = UNLOCK motor side Violet/Black and Violet = 12v constant w/15amp fuse Maybe the fuse is blown, as they will still work from the switch if it is. I'd probably use 2 of the extra channels for the seats and mirrors. ------------- Viper Equipped
Posted By: myredbeauty
Date Posted: January 15, 2003 at 9:11 PM
thank you for your post, alarm tech. yeah, the problem that i found yesterday is the fuse with violet wire. now the system works great.  and i am thinking the same thing about the seats and mirrors, but how can i do? do you know how i can do with it? if so, please tell me about it. thank you.
Posted By: AlarmTech
Date Posted: January 16, 2003 at 1:39 AM
There ya go! :) but why did it blow? i really have no idea how the seats and mirrors work, your gonna need a schematic and start testing wires. once you know the functions of the wires needed, then you can set-up relays and program the channels appropriately. ------------- Viper Equipped
|