compustar manual disarm?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81038
Printed Date: May 13, 2025 at 6:38 PM

Topic: compustar manual disarm?

Posted By: cerwinvega19
Subject: compustar manual disarm?
Date Posted: July 31, 2006 at 11:09 PM

Hey I lost my remote for my compustar alarm and the alarm is armed. I had my car parked for a few months and can't find the remote. Is there a way to disarm the alarm so i can program a new remote? If you know how you can post here or email me at lockdown416@rogers.com.
Thanks.

Replies:

Posted By: bbtaco
Date Posted: August 01, 2006 at 7:53 AM

Look here for the manual for your alarm. I believe to enter Valet mode you need to turn the ignition switch on and off either 3 or 5 times. It depends on your model alarm. You have to do this quickly, within about 5 seconds.

Compustar user manuals

Posted By: Velocity Motors
Date Posted: August 01, 2006 at 9:19 AM

Toggle ignition switch 5 times within 3 seconds and after you do this, have a new transmitter handy because you can relearn a new tranmistter at the same time. Press LOCK or button #1 if its a 2 way system and it will learn a new transmitter.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: cerwinvega19
Date Posted: August 01, 2006 at 9:52 AM

Thanks alot guys, I am going to pick up a new remote and try to program it. I'll let you know if it works or if there are any problems.
Thanks again!

Print Page | Close Window