Need help with remote start on Aladdin 2000
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8107
Printed Date: July 19, 2025 at 5:11 PM
Topic: Need help with remote start on Aladdin 2000
Posted By: Ht3kn1c
Subject: Need help with remote start on Aladdin 2000
Date Posted: January 13, 2003 at 9:12 PM
I need help with remote start on the Aladdin alarm. The car starts fine, but the problem I have is that after a while the car turns off. The alarm thinks that the door is opened thats why the car shutted off. During installation when I tested the remote start, everything was working fine until now. When I arm the alarm, the door is never triggered, only with remote start. Can anyone help me with this problem. My car is a 99 Civic Ex Sedan Manual by the way. Thanks.
Replies:
Posted By: profuse007
Date Posted: January 13, 2003 at 11:20 PM
like after 15 min or so, if so that might the running time for the autostart-its normal
Posted By: Velocity Motors
Date Posted: January 14, 2003 at 5:19 AM
Diode isolate the door triggers from each other with a 1N4001 1 amp diode witht he cathode band facing the triggers.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Ht3kn1c
Date Posted: January 14, 2003 at 9:27 PM
I just diode isolated the door triggers with a 1 amp diode from radio shack and I'm still having the same problem. What am I doing wrong? The car still shuts off because the door is being triggered. I hooked up the diode with the cathode end, the white line on the diode facing the door triggers on all four doors, same thing. Could the door trigger be touching a ground somewhere? It worked fine before when I tested it before putting everything back together. The door never triggers when the alarm is armed. Do I have to switch the door trigger to positive? Right now its hooked up to the blue wire on the P10 harness to the lt. gren/red in the alarm plug. Can someone please help me out. Thanks.
Posted By: Velocity Motors
Date Posted: January 14, 2003 at 9:49 PM
When you say you diodes isolated the triggers with a 1 amp diode did you grab each trigger or just the one wire at the alarm plug ? ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Ht3kn1c
Date Posted: January 14, 2003 at 9:50 PM
Posted By: Ht3kn1c
Date Posted: January 14, 2003 at 9:51 PM
Or was i suppose to only grab only one wire? from the alarm plug?
Posted By: Ht3kn1c
Date Posted: January 14, 2003 at 11:57 PM
I tried disconnecting the fuses on the alarm and reinstalling them and when I did the remote went off saying that the door is triggered. Is this normal? Could that be my problem?
Posted By: Ht3kn1c
Date Posted: January 15, 2003 at 8:33 PM
|