Lion C803 Car Alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81142
Printed Date: May 11, 2024 at 2:32 PM
Topic: Lion C803 Car Alarm
Posted By: rando
Subject: Lion C803 Car Alarm
Date Posted: August 03, 2006 at 7:21 AM
I need the circuit diagram for the circuit board and wiring diagram for this alarm. Any help would be appreciated. Numbers on the board are: C803D No:040716 and WD1246H. The cpu/firmware is: c004f
-------------
Only the Best will do
Replies:
Posted By: mercury2006
Date Posted: August 25, 2006 at 1:34 AM
i was also needing help with this as im a novice at setting these up but shrug i managed it all myself am i able to post pics on here? cause ive redrawn the wiring diagram i got as i think the original drawing was done by a pre schooler
-------------
Ive got grey knews for you its niether good nor bad.
Posted By: rando
Date Posted: August 25, 2006 at 6:57 AM
Hello Mercury2006... That sounds great. I would love to have a copy. I actually got the factory in China to email me a copy and you are right, it is an awful drawing, very hard to follow. I am sure they must have some machine to do all the chinese/english transaltions too.
Would it be possible to email it?
-------------
Only the Best will do
Posted By: theroadie
Date Posted: August 31, 2006 at 3:17 AM
Hey, I need some help with this alarm too. I managed to deprogram the remote from the brain. Does anyone have a copy of the manual? I do, but the "emergency disarm procedure" doesn't work on the alarm (which you need before reprogramming). Any other copies of the manual would be swell. Cheers, harold
Posted By: mercury2006
Date Posted: August 31, 2006 at 11:11 AM
im not sure where to email it but i got the manual email to me but i also have my own diagram i think i can help u both but im strugglig with the siren on mine its got 4 wires and when i conect the red to the main unit (brain) and the black to ground and leave the blue and white out it just sorta clicks doesnt chirp properly
-------------
Ive got grey knews for you its niether good nor bad.
Posted By: theroadie
Date Posted: August 31, 2006 at 8:45 PM
From recall, with the battery backup siren, you connect the black to the car's negative, and red to car's positive. The blue and white cables seem to be the +ve and -ve triggers for the siren. I'm pretty sure you can connect the alarm output to either of these, though one might be louder
My email address is crazy_grandpa_society@hotmail.com
Cheers,
Harold
|