compustar shock sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81144
Printed Date: May 02, 2025 at 1:45 AM

Topic: compustar shock sensor

Posted By: djlayz
Subject: compustar shock sensor
Date Posted: August 03, 2006 at 7:40 AM

I have a 2W900FM-AS and yesterday i was hooking up a 2nd shock sensorbut before i did that i was messing around withe the sensor that comes with it, and noticed when i hit it or shook it it didnt go off right away. I had to do it for like a minute before it went off and the sensitivity was up to 10. does anyone know why there is such a big delay?

Replies:

Posted By: JWorm
Date Posted: August 03, 2006 at 5:56 PM

Did you wait a minute after arming the alarm before hitting it?

There is a delay to allow the car to settle and stop shaking/vibrating from closing the door. I don't think a thief is going to break into your car within seconds of you arming it.

Posted By: djlayz
Date Posted: August 04, 2006 at 7:38 AM

im going to have to try that

Print Page | Close Window