viper alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8115
Printed Date: May 15, 2025 at 5:42 AM

Topic: viper alarm

Posted By: typer215215
Subject: viper alarm
Date Posted: January 13, 2003 at 10:24 PM

when i cut the starter wire on the ignition , which you gonna have two open end of the wire or an open circuit. i know the purple wire from the heavy guage relay satellite are connected to the wire that goes to the starter, but what about the other end of the wire that goes to the ignition, what color of the heavy guage relay satellite wire is it suppose to connected to?

Replies:

Posted By: profuse007
Date Posted: January 13, 2003 at 10:55 PM

what model viper is this, i think viper have green black and orange. and yellow. green to key side, black starter side, yellow to ignition, orange to brain (ground when arm output)

posted_image

Posted By: typer215215
Date Posted: January 13, 2003 at 10:58 PM

550 esp

Posted By: profuse007
Date Posted: January 13, 2003 at 11:09 PM

you looking at the autostart then, you said cuttin the starter wire, i thought you talkin about starter kill

Posted By: profuse007
Date Posted: January 13, 2003 at 11:15 PM

try installing the starter kill first and put the purple to the starter side, for the starter kill- the other side is for green wire. look at your starter kill relay

Posted By: typer215215
Date Posted: January 13, 2003 at 11:25 PM

thanks profuse007, cleared everything up

Print Page | Close Window