Print Page | Close Window

alarm wont lock doors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81265
Printed Date: June 09, 2024 at 5:10 PM


Topic: alarm wont lock doors

Posted By: playboy00786
Subject: alarm wont lock doors
Date Posted: August 06, 2006 at 11:19 AM

I have a 99 chrysler lhs and a scytek 5100rs alarm everything works except for the lock button. it will unlock but wont lock. When i hit the lock button it will arm the system but wont lock the doors. Any help thanks.




Replies:

Posted By: captainzab
Date Posted: August 06, 2006 at 11:58 AM
Lock wire not hooked up, wrong resistance, or relay messed up.
99 Chrysler LHS
Lock Wire Diagram
the DOOR LOCKS on this vehicle require a (+)Positive thru a 2700 Ohm resistor to LOCK and a (+)Positive thru a 620 Ohm resistor to UNLOCK, some units will also require 2extra relays for the keyless entry feature to work properly

-------------
Note: You Always Dont Get What You Pay For.





Print Page | Close Window