clifford RSX3.5, lights?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81431
Printed Date: May 25, 2025 at 12:11 PM
Topic: clifford RSX3.5, lights?
Posted By: oakey22
Subject: clifford RSX3.5, lights?
Date Posted: August 10, 2006 at 6:59 AM
I have ordered a clifford RSX3.5 and some extra sensors, what i want to know is, when i press arm on the fob i want it to flash the indicator lights, but i understand when i activate remote start it will put these on aswell, but i want it to put the lights on instead, is this possible? Also what do you call parking lights? on my calibra 1997 i am sure it just puts one light on at the front and one on at the back.
Replies:
Posted By: ringojam
Date Posted: August 10, 2006 at 7:44 PM
Use diodes to flash the indicator lamps .park light output to 2 diodes one left indicator the other to the right indicator.Parking lights are the lights that come on when you turn the first click of your headlamp switchMost eroupean cars carry seperate parklight markers.
-------------
Jamaica home of the worlds fastest man.
Posted By: oakey22
Date Posted: August 11, 2006 at 3:03 AM
so i have to connect the parking light wire to my indicators then?
Posted By: Chris Luongo
Date Posted: August 11, 2006 at 6:54 AM
Like you said, if you simply connect the parking light output from the alarm to the turn indicators, then the indicators will will probably be flashing the entire time the remote start is running----annoying.
If you are creative, and handy with relays and finding wires in the car and whatnot, here is what I would do.
--Connect the parking light output to the car's parking lights, as normal.
--Connect the "factory disarm" and "factory re-arm" wires so that they trigger the turn indicators.
--When the remote start is running, you'll just have parking lights.
--When you lock or unlock the car, the bright turn indicators will flash.
Posted By: oakey22
Date Posted: August 11, 2006 at 7:09 AM
so i would do it this way? H1/2 White wire it to my parking lights. H2/4 GREEN / WHITE wire to a relay and then onto the turn indicators H2/6 GREEN/ Black wire to a relay and then onto the turn indicators
Posted By: kgerry
Date Posted: August 11, 2006 at 9:08 AM
hey Chris, why not just change the parking lights from flashing to constant in the programming? i never let a unit go out of here with the p lights set to flashing... i program them all for constant ------------- Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: oakey22
Date Posted: August 11, 2006 at 9:40 AM
kgerry but is my wiring right? i can change it to constant with the valet buttonas that is what i had planned.
|