Could somebody help me on some info to install a viper 791xv in my 1994 saab 9000 aero.The car does have the factory anti-theft alarm.My problem is how do I bypass it so I can install the viper?I install a remote stater and alarm in all of my car but this is the only one with the factory anti-theft in there to make it harder for me.Please any info would be helpful as I dont want to use the key to lock and unlock the car.The factory alarm is arm when I lock the car and will activate in about a 1 min.So say if I dont use the key to lock it then I wont have to bypass the factory system right?
This should help you out
&yr=4573&product=Remote%20Start
-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
94 Saab 9000
The 791 has a factory alarm disarm wire that outputs when you press unlock and do remote start.
Use relay with this setup
85 factory alarm disarm wire
86 & 87 12v
30 factory alarm disarm wire of car
FACTORY ALARM DISARM RED (+) @ THEFT MODULE, See NOTE *2
NOTE *2 the THEFT MODULE is located behind the GLOVE BOX.
HEY, anyone knows if he can use the + unlock wire from the 791 to trigger the factory alarm disarm wire?
Because his car has type B (neg.) lock/unlock.
So can he hook up the green wire to the disarm wire since it gives off + when he press unlock? Or will this draw too much current?
-------------
Note: You Always Dont Get What You Pay For.