Rearm/Disarm Output?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81583
Printed Date: September 12, 2025 at 3:25 AM

Topic: Rearm/Disarm Output?

Posted By: dumbguyd
Subject: Rearm/Disarm Output?
Date Posted: August 13, 2006 at 7:55 PM

I have an artic start cm3000 version 3, im installing it on a 1990 240sx, and im installing an alarm for the first time so im just wondering where the rearm output and disarm output would be connected too. also the car isnt equiped with a factory alarm if that makes a diffrence.

-------------
- Derrik

Replies:

Posted By: captainzab
Date Posted: August 13, 2006 at 9:30 PM

dont need factory alarm disarm/rearm if you know there is no factory alarm on your car.
Just cut the wire and tape it.

-------------
Note: You Always Dont Get What You Pay For.

Print Page | Close Window