lock head

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81696
Printed Date: May 28, 2024 at 6:42 PM

Topic: lock head

Posted By: 324069
Subject: lock head
Date Posted: August 16, 2006 at 1:29 PM

I am trying to install in my car an arlarm system and here i just got a problem which i dont get. it is about ACC and ON position. It means that the ACC position has is owne wire and ON position has is owne wire? cause in my diagram it says that i should connect a white wire to the ACC. Now i wouldlike to know if ACC is CONSTANT +12 VOLTS or it is the IGNITION +12 VOLTS

in my lock head i have OFF, ACC, ON, START .

REgards

Replies:

Posted By: KarTuneMan
Date Posted: August 17, 2006 at 12:05 AM

What kind of car bro....year, make, model..........

Posted By: dea,can
Date Posted: August 17, 2006 at 2:19 AM

this is 3 basic wires to power up the system just little help your wire colors may be different . for a car alarm.

-------------
dragon

Posted By: 324069
Date Posted: August 17, 2006 at 6:58 AM

I HAVE A MAZDA 323 EXECUTIVE 1997

Print Page | Close Window