alarm not opening doors
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81748
Printed Date: July 09, 2025 at 7:27 PM
Topic: alarm not opening doors
Posted By: plyrh8r1
Subject: alarm not opening doors
Date Posted: August 18, 2006 at 2:33 PM
i have a 1993 ford escort with shaved door handles. i have auto poppers with a dei hornet alarm with remote start. my problem is that my doors dont open any more if i jump the wires to the relay thay work fine they just dont work off the remote. the alarm arms and disarms and starts the car. somebody said i might have to reprogram my remote to work the doors. thanks guys
Replies:
Posted By: duallyit
Date Posted: August 18, 2006 at 6:08 PM
you may have to set the remote in programming the door pulse to a double pulse check that out see if that dont help you out
-------------
DUALLYIT
Posted By: swamprat323
Date Posted: August 19, 2006 at 9:57 PM
meter the wires form alarm see if you have "output"
Posted By: plyrh8r1
Date Posted: August 21, 2006 at 8:27 PM
how do set the pulse
Posted By: swamprat323
Date Posted: August 22, 2006 at 7:22 PM
look in the install guide, programing, it tell ya in there, if dotn have the install guide look in the down laod sections see if its in tere, if not post what system you have here.
Posted By: plyrh8r1
Date Posted: August 25, 2006 at 3:22 PM
i have a dei hornet 553t with a dei channel expander 450r i didnt see my model in the download
Posted By: swamprat323
Date Posted: August 25, 2006 at 5:22 PM
the hornet 553T is now in the download section.
Posted By: geofbettis003
Date Posted: August 25, 2006 at 5:27 PM
have you tried reading the alarm with a bitwritter? if not give it a shot, you might want to look at the "ignition controlled locks" section
Posted By: plyrh8r1
Date Posted: August 27, 2006 at 9:39 AM
i dont have biwritter. thanks for the download. i think i might just take it back to the shop that did the install thanks for the help guys
Posted By: plyrh8r1
Date Posted: September 07, 2006 at 5:53 PM
well i took my car in to the alarm place and i found out that the 2nd and 3rd channel dont work anymore. so i have to get a new brain thnaks for the help guys
|