Park Lights On

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8183
Printed Date: May 10, 2025 at 10:39 PM

Topic: Park Lights On

Posted By: kronos45
Subject: Park Lights On
Date Posted: January 15, 2003 at 5:28 PM

I have a 94 T-Bird with Viper Alarm installed when car was new. How do I disable the flashing circuit to prevent the park lights from staying on when alarm is armed. I have to activate and deactivate alarm numerous times until I can get lights to go off. I then have to go into valet mode to be able to start car. Is the alarm wired to the flasher circuit or does it have it's own flasher circuit wired directly to the park lights? Please help!, dead batteries aren't fun. Thanks

Replies:

Posted By: Velocity Motors
Date Posted: January 15, 2003 at 5:39 PM

Sounds like you may have a CPU malfunction. The parking light circuit is supposed to flash once when armed and twice when disarmed. You may find a fuse on the parking light wire of the alarm that you can take out, but this will eliminate the parking lights confirmation flashes from the alarm system. What model number Viper do you have? Should be able to get a wire color for you so you can pull the proper fuse out of the harness.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: kronos45
Date Posted: January 15, 2003 at 6:13 PM

Thank's for the quick response Jeff. I don't know the model number of the Viper at this time because I can't find where the installer placed it . Under dash access is very tight. I guess I'll have to get a wrecking ball and get down to business. Any Ideas on where it might be hidden? Is there any place where I can find a wiring schematic for the alarm once I can identify it? Thanks again.

Posted By: Velocity Motors
Date Posted: January 15, 2003 at 6:19 PM

Check the driver side dash ( high under the dash on the left side )
Check behind the glove box
look for the LED light and trace it back to the CPU
The normal color for the parking lights for DEI products is WHITE. Hopefully there is a fuse attached to this and if there are no fuses then you will have to cut this connection

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA