Remote start just bleeps

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81830
Printed Date: July 13, 2025 at 11:17 PM

Topic: Remote start just bleeps

Posted By: oakey22
Subject: Remote start just bleeps
Date Posted: August 20, 2006 at 11:16 AM

I have a clifford matrix 3.5 and when i press the remote start button all it does is flash the parking lights and bleep twice on the remote. Also shows the smoke on the screen for about 1/2 second aswell. Anyone know what it could be?

Replies:

Posted By: oakey22
Date Posted: August 20, 2006 at 11:24 AM

For a little more info i dont have the Tacho wire connected at the moment due to it stopping the signal to my rev counter. I think i need to put a diode on it but dont have any on me at the moment.

The starter doesnt even try to activate.

Posted By: oakey22
Date Posted: August 20, 2006 at 2:25 PM

sorted it :)

was a bad wire from the brake pedal thinking it was activated all the time. Oops.

One othe problem now is that when i activate remote start the voice module activates and tells me it is protected. How can i stop this?

Print Page | Close Window