Print Page | Close Window

Push Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8192
Printed Date: June 16, 2024 at 8:09 AM


Topic: Push Start

Posted By: themagicone
Subject: Push Start
Date Posted: January 15, 2003 at 7:16 PM

how can i make a push start system for my car? Is there something i can buy or is it something i have to custome make?




Replies:

Posted By: 10nesne1
Date Posted: January 15, 2003 at 8:40 PM

Well, that's a good question.  I guess you can custom make one yourself.  It depends what kind of vehicle you have.  Honda S2000 comes with a push button start from factory.  Remember the starter wire only has power when its turn over.  Then the starter wire will have no power.  All you need is a high current push button switch to do the job.  Just cut the starter wire and connect it to the push button switch.

Good luck





Posted By: themagicone
Date Posted: January 15, 2003 at 8:45 PM

Well how should I power the ingintion and acc wires? I want to do it all with a push of the button.





Posted By: Velocity Motors
Date Posted: January 15, 2003 at 9:05 PM
Didn't I help you with this offline ?? or was that someone else ??posted_image

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: themagicone
Date Posted: January 15, 2003 at 9:50 PM
someone else Jeff.




Posted By: Velocity Motors
Date Posted: January 16, 2003 at 7:53 AM

Here's the low down on this other system that I helped another member with:

  • He had a push button starter ( S2000 one ) but wanted to get rid of his ignition switch
  • he wanted to use a toggle switch to engage his ACC & IGN wires ( so he could also play radio while not having the car run )
  • given the above facts I drew up this relay circuit for him: https://www.velocitymotorsport.com/images/install_notes/117.jpg
  • This was for a 1996 Accord BTW.

Check this out and see if there are any errors or what you mat want to change on it.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: Patel
Date Posted: January 16, 2003 at 12:55 PM

i had an aftermarket push button type starter (same as s2000) it was from a company call ignited.  They make them in a varity of colours and styles. They also have kill switches and flight switches. easy to install and never had a problem with it in 4 yrs.  And ppl were fasinated with it! email me if u want more info, or want one.

https://www.ignitedperformance.com





Posted By: 5hift fast
Date Posted: January 16, 2003 at 2:12 PM
I put one of these in my Neon....I bought my push button for $29.99 it took less than a hour to put in. It's only sodering 4 wire and your set.  I'm not to sure about the what'd you need to make one but $29.99 didn't seem bad for mine.  It's sold by arospeed.  It's the exact same as an ignited model at half the cost.  Otherwise I think you can get these from a Honda dealer for $60.00 however your direciton are in Japanesse :0





Print Page | Close Window