Print Page | Close Window

python 881XP transmitter programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81921
Printed Date: May 15, 2025 at 1:48 AM


Topic: python 881XP transmitter programming

Posted By: gnehc1
Subject: python 881XP transmitter programming
Date Posted: August 22, 2006 at 1:30 PM

Sorry if this post has bee asked many times, but I DID do a search before posting.  My question is how do I program a replacement transmitter for a Python 881XP alarm?  I read through the owner's manual many times and no where does it tell you how to program it to control the alarm.  It did however tell me how to use the alarm and what the buttons are for.  I just bought a 2005 Honda S2000 from a used car dealer and it only came with one remote. 

If you guys are able to help me on that question, then how about programming the alarm do do things like auto-arm and, and ignition controlled door lock, (cause I hate it when it locks up when the car starts).  I know there are ways to reprogram the alarm, but I just can't find out where.

any info would be great.

thanks guys,




Replies:

Posted By: swamprat323
Date Posted: August 22, 2006 at 2:45 PM
look in the down load section yuo fidn the install guide it tell ya in there


Print Page | Close Window