dual sensor location ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82119
Printed Date: May 01, 2024 at 10:29 PM

Topic: dual sensor location ?

Posted By: duallyit
Subject: dual sensor location ?
Date Posted: August 27, 2006 at 12:41 PM

were would be a good location for the placement of a dual sensor ? does the sensor have to mounted to a flat peice of metal to have the pre warning to work ? or can i tye strap the sensor to any good location?

-------------
DUALLYIT

Replies:

Posted By: duallyit
Date Posted: August 27, 2006 at 12:44 PM

thank you all for your assistance and your help in all my questions !

by the way the alarms that i have installed are the asian wolf remote start v2009 version 2.

-------------
DUALLYIT

Posted By: gcorrea
Date Posted: August 31, 2006 at 12:07 AM

i like placing my dual stage shock sensors on the thickest wire loom availabe. but thats just me.

-------------
gcorrea

Posted By: swamprat323
Date Posted: August 31, 2006 at 12:38 AM

gotto watch out with placign on metal may not feel thw whole car. but i have done both on wire harnessa nd flat metal , ac ducts.

Posted By: wranglercory
Date Posted: September 01, 2006 at 3:18 PM

if you are installing a dual zone motion sensor I would mout it under the carpet on the trans. hump if it is a shock sensor I would mount it to a medium sized harness .

Print Page | Close Window