my Clifford Alarm is disarmed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82275
Printed Date: May 15, 2025 at 1:51 AM

Topic: my Clifford Alarm is disarmed

Posted By: pgtundra
Subject: my Clifford Alarm is disarmed
Date Posted: August 30, 2006 at 4:15 PM

I bought a used truck with a Clifford alarm already installed. I don't have the manual. It's a Prime Level 2-4-5 ,I think. It has a 4 button remote with G4 written on it. It worked fine until it was disarmed with the valet switch. Remote start works, the doors can be unlocked with the remote but I can't lock the power locks and arm the system. Can I reactivate the alarm with the valet switch?

-------------
Chris

Replies:

Posted By: mrcllusb
Date Posted: August 31, 2006 at 6:34 PM

Yes you can ,you just need to know what the code is for the valet switch..

-------------
"ole blake"

Print Page | Close Window