507M trigger output
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82310
Printed Date: May 15, 2024 at 6:35 PM
Topic: 507M trigger output
Posted By: bsd1
Subject: 507M trigger output
Date Posted: August 31, 2006 at 11:32 AM
vehicle: 1995 240sx
alarm: clifford matrix RSX 3.5
info: remote start not installed
Wrong info all over the installation guide, so I really have to ask this.
507M digital tilt sensor doesn't have the green wire. Does that color mostly indicate a warn away output?
If so, can I just connect the Blue(-) trigger output of 507M to the shock sensor port's orange wire with diode, and sharing it with the shock sensor, and I still get instant trigger because blue wire always send 1s output whereas green wire sends 500ms?
Or must I connect it to the blue wire of H1 and sharing it with the trunk trigger?
Replies:
Posted By: gcorrea
Date Posted: September 10, 2006 at 1:02 AM
you can hard wire it with the shock sensor or yes you can also use your hood pin or trunk triggers. why would the 507 have a green wire? its an instant trigger.
-------------
gcorrea
|