Print Page | Close Window

car alarm on acura integra 1991

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82313
Printed Date: May 14, 2024 at 11:45 AM


Topic: car alarm on acura integra 1991

Posted By: electrocution
Subject: car alarm on acura integra 1991
Date Posted: August 31, 2006 at 2:36 PM

car: acura integra 1991
alarm: codealarm model ca100
 
ok so I have almost every wire hooked up from the main module but now the only thing I can't figure out is 3 wires from the main module which is the positive door pin switch input, negative door pin switch input, and the last is instant trigger ground input. can anyone help me on this? I was thinking the negative door pin switch is like a ground and the positive pin switch wires into the door trigger which is the GREEN/ red (-) wire but that's what I don't get it's a negative in polarity wire. can anyone help me out?
 
here is the wiring diagram for my car
posted_image



Replies:

Posted By: bsd1
Date Posted: August 31, 2006 at 3:45 PM
From the 6-pin mini harness, you either use 1 or 3, NOT BOTH. Use violet (+) input or green (-) input.
The number 2 blue (-) is for instant trigger like trunk trigger.
Look up the download section and find out your car uses + or -.





Print Page | Close Window